Matt two-part epoxy floor coating for garages

€47,90
€19,16/kg
Tax included. Shipping calculated at checkout.

How much coating do I need for my garage?

Allow about 10 kg for two coats on 20 m². Each coat uses approximately 250 g/m². Actual coverage depends on the surface and application.

Approximate coverage for two coats: 2.5 kg for 5 m² · 5 kg for 10 m² · 10 kg for 20 m² · 20 kg for 40 m².

Application guide (PDF, EN, V1.0) – Matt two-part epoxy floor coating for garages

At a glance

  • Consumption: about 250 g/m² per coat; two coats recommended.
  • Coloured coating: ten parts base to one part hardener by weight. Pot life about 60–90 minutes.
  • Apply at +15 to +25 °C. At 20–25 °C and 40–60% relative humidity, allow about 24 hours for foot traffic and 7–9 days for full service.

Product description

This water-based two-part coating gives suitable interior floors in garages, cellars and workshops a matt finish. The surface must be sound, clean, dry and free of grease. Check adhesion and colour on a test patch.

Technical data

  • Consumption: about 250 g/m² per coat; two coats recommended.
  • Coloured coating: ten parts base to one part hardener by weight. Pot life about 60–90 minutes.
  • Apply at +15 to +25 °C. At 20–25 °C and 40–60% relative humidity, allow about 24 hours for foot traffic and 7–9 days for full service.

Approximate coverage for two coats: 2.5 kg for 5 m² · 5 kg for 10 m² · 10 kg for 20 m² · 20 kg for 40 m².

Application & preparation

Prime the prepared floor with a suitable primer. Mix the base and hardener immediately before use as directed. Recoat after 12–48 hours, ideally after 24 hours. Sand before recoating at 48 hours or later. Protect from water during curing.

Application guide (PDF, EN, V1.0) – Matt two-part epoxy floor coating for garages