Fassaden-Klimabeschichtung Weiß

€17,90
€23,87/L
Tax included. Shipping calculated at checkout.

At a glance

  • Water-based, vapour-permeable facade coating for exterior use.
  • Contains ceramic microspheres and a UV-curing binder; sufficient daylight is required.
  • Apply by brush, roller or spray to sound, clean and suitable substrates.
  • Approximate consumption of 330 ml/m² on smooth substrates that are not highly absorbent, according to the guide.
  • Apply two coats for the initial coating and allow 12 hours of drying between coats.
  • Maintain at least +5 °C, including during drying. The coating does not replace building insulation.

Product description

FONTEINO Facade Climate Coating is a water-based, vapour-permeable coating for exterior use. The formulation contains ceramic microspheres and a UV-curing binder. Apply to suitable, sound and carefully prepared substrates with sufficient daylight. The initial application requires two coats, allowing 12 hours of drying between coats. Approximate consumption is 330 ml/m² on smooth substrates that are not highly absorbent. The temperature must remain at least +5 °C, including during drying. The coating does not replace building insulation. Follow the product-specific application guide.

Technical data

  • Use: exterior facade coating on suitable, carefully prepared substrates.
  • Binder: water-based and UV-curing; sufficient UV/daylight is required.
  • Consumption: approximately 330 ml/m² on smooth substrates that are not highly absorbent.
  • Initial application: two coats, with at least 12 hours of drying between coats.
  • Application temperature: at least +5 °C, including during drying.
  • Application: brush, roller or spraying equipment.
  • Tool cleaning: with water immediately after use.
  • Source: FONTEINO Facade Climate Coating Application Guide, DE V1.0, 25 July 2026.
  • Water-based, vapour-permeable exterior facade coating.
  • Contains ceramic microspheres and a UV-curing binder; sufficient daylight is required.
  • Apply with a brush, roller or spray to suitable, clean and sound substrates.
  • Approximate consumption: 330 ml/m² on smooth substrates that are not highly absorbent.
  • Apply two coats initially and allow 12 hours of drying between coats.
  • Maintain at least +5 °C during application and drying. This coating does not replace building insulation.

Application & preparation